> 产物中央 >>Sensors >> Fiber Photoelectric Sensor >> Fiber Sensor FG-200新澳门葡京网址
www.1495.com

产物详情

www.1495.com

8894.com
Light source
    Red light source                Red light source    
Model

        FG-200N                           FG-200P

    FG-200N-M8                       FG-200N-M8

Detection output

NPN open-circuit collector transistor
Maximum inflow current: 100mA
External voltage below 30V (at detection output and 0V)
Residual voltage: below 1.0V (when inflow current is 50mA)
Less than 0.4V (current 16 mA)


PNP output type
PNP open-circuit collector transistor
Maximum inflow current: 100mA
External voltage below 30V (at detection output and +V)
Residual voltage: below 2.0V (when inflow current is 50mA)
Less than 1.0V (current 16 mA)

output setting
-
Operation output
ON at detection or non-detection, can be set by keystrokes
Self diagnosis
Output ON during unstable detection lasts for 40 ms, and output is cut off automatically
when short circuit is output, and protection signal lasts until short circuit is removed.
Reaction time
Switching frequency: 1KHz, reaction time 500uS
Detection distance
Red light source: diffuse reflection detection distance: 200 mm (diameter 1 mm core)
counter-fire detection distance: 800 mm (diameter 1 mm core)
Delay function
0~9999ms optional
Transmitting power
200% ,100%,50%,25%,12% the five of transmit power can be set by keys
Special Output 1
Rising edge pulse output and falling edge pulse output (pulse width is achieved by setting delay time)
Special Output 2
-
Special input
-

Ambient temperature
-10℃~50℃(No dew or frost ) storage :-20℃~70℃
Ambient humidity
35-85% RH, storage: 35-85% RH
Remarks -

材料下载